![[Salome Meca – Code Aster] Nonlinear Quasi-static Plate with a Hole Tutorial](https://feaforall.com/wp-content/uploads/2021/08/Nonlinear-plate-Tutorial-1024x576.jpg)
In this tutorial for Salome Meca with Code Aster, I will talk about: What is nonlinear quasi static simulation Some of the theoretical aspects that you need to understand for nonlinear simulation How to change the plate with a hole model into a nonlinear simulation How to enter the strain hardening curve in code aster […]
Simulate a PCB board Steady State Heat Transfer with Salome Meca
So here is how you can simulate a PCB steady state heat transfer with Salome Meca! Video Tutorial: In this video, you will learn: How to import and mesh correctly a CAD model with multiple parts in Salome Meca Geom Module How to assign boundary conditions, groups and mesh the model in Smesh How to […]
[Salome Automation 4 ] Automating Paravis Post-processing with YACS
![[Salome Automation 4 ] Automating Paravis Post-processing with YACS](https://feaforall.com/wp-content/uploads/2020/11/Salome-Automation-Part-4-1024x576.jpg)
The 4th part of the YACS tutorial series is here… Post-processing, Finally! ;-) First, I’l come back briefly on the previous video and show you how to correct the small assignment I gave you… to set up a control node that will write the comm file to control Code_Aster’s input deck with parameters! I hope […]
[Salome Meca Tutorial] Heat Case Transient Thermal Simulation
![[Salome Meca Tutorial] Heat Case Transient Thermal Simulation](https://feaforall.com/wp-content/uploads/2020/10/heat-case-transient-1024x576.jpg)
Finally, a tutorial about Transient Thermal Simulation ;-) In this video, I’ll go through all the process to define and simulate a model with several parts and perform a transient thermal simulation in Salome Meca! Yes, you have been a lot to ask me about this one… I hope this will finally clarify the simulation […]
Salome Automation 2 – Automating Geometry and Mesh Creation with YACS
I promised that I would show you how to automate Salome, including geometry, mesh, simulation and post-process! So, here you go ;-) Let’s start with the Geometry and the Mesh today. Nothing too fancy, just a 3D plate… but that’s how great project start, from small plates ! If you haven’t watched the first video […]
[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca
![[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca](https://feaforall.com/wp-content/uploads/2020/08/Wrench-Simulation-with-Salome-Meca-Tutorial-Thumbnail-1024x576.png)
Hello guys. Cyprien here from FEAforall. in this article, we’ll have a look at how to simulate a wrench into Salome Meca with Code_Aster and I’ll be using Aster Study to do this. In this video I’ll really go into the details at how to get a very nice mesh, how to get some kind […]
