![[Salome Automation 4 ] Automating Paravis Post-processing with YACS](https://feaforall.com/wp-content/uploads/2020/11/Salome-Automation-Part-4-1024x576.jpg)
The 4th part of the YACS tutorial series is here… Post-processing, Finally! ;-) First, I’l come back briefly on the previous video and show you how to correct the small assignment I gave you… to set up a control node that will write the comm file to control Code_Aster’s input deck with parameters! I hope […]
How to interface Code_Aster and Open Turns to do uncertainty quantification and sensibility analysis
Today, Let’s talk about uncertainty quantification and sensibility analysis! There is an open-source tool for that called OpenTurns which is integrated in Salome_Meca 2019 (Linux version). There are few tutorials available yet showing the full simulation with Code_aster and the usage of this simulation data to build an openturns case! That’s why one of my […]
[Salome Video Tutorial] Automating Geometry Creation with Python
![[Salome Video Tutorial] Automating Geometry Creation with Python](https://feaforall.com/wp-content/uploads/2018/05/Automating-with-Python-Salome-thumbnail-1024x576.jpg)
This week I am going into one of the most interesting aspects of using open-source FEA, the fact that you can automate fully geometry and mesh creation using Python! Yes, by automating, I mean that you can create a script and let it make all the hard work to create your geometry model from zero. […]
[Salome-Meca Tutorial] How to perform a modal analysis?
![[Salome-Meca Tutorial] How to perform a modal analysis?](https://feaforall.com/wp-content/uploads/2018/02/Modal-analysis-THUMBNAIL-1024x576.jpg)
In this video tutorial for Salome-Meca 2017, I will show you how to do a modal analysis of a simple plate with Aster-Study! Here’s what you will learn: How to model the plate and prepare the mesh How to use the ASSEMBLAGE function to generate the mass and rigid matrix. How to use the […]
How to install Salome Meca 2017 on Windows?
Since the last videos I made which showed how to install a Virtual Linux Machine on your PC and install Salome Meca 2017 on top of it, a new release of Salome-Meca 2017 for Windows went out! Good news for those who are a bit afraid to step into the linux world but still want […]
Open-source FEA: Short Introduction (1)
When we realise the huge investment required to use a commercial FEA software package, we all naturally think about using Open-source FEA software to solve the same problems for free… but is it so easy? What is an Open-source FEA software by the way? How does it work? That’s the question I’ll try to answer in this […]
