In today’s article, I am going to explore with you how to solve the simple cavity flow example with Openfoam! This tutorial will describe how to pre-process, run and post-process a case involving isothermal, incompressible flow in a two-dimensional square domain. Openfoam Lid-Driven Cavity Flow Tutorial This is how the boundary conditions of the cavity […]
[Tutorial 1] How to Install OpenFoam on Linux and Windows
Let’s Talk about Openfoam! Several of my viewers and subscribers have asked me to start making OpenFoam Tutorials, so this is why I am starting this new series. The Purpose will be to show you how to operate the OpenFoam solver with the minimum of hassle and I’ll try to teach you some knowledge about CFD […]
[Salome Automation 5] Batch Process Aster simulations with a loop in YACS
The 5th tutorial of the series is here. In the previous videos, I have shown how to automate 1 simulation using parameters to make it parametric. Now… no one wants to run one sim, wait for it to finish, change the parameters and try again. That’s why I will show you now how to make […]
[Salome Automation 3 ] Automating Code Aster Simulation with YACS
The next video of the YACS series “Salome Automation” is here and we are going to learn together how to automate a Code_Aster simulation with YACS… Cool, eh? This is the 3rd video of the series, so I won’t go back on the basics I taught in the video 1 and in the video 2 […]
[Salome Meca Tutorial] Heat Case Transient Thermal Simulation
Finally, a tutorial about Transient Thermal Simulation ;-) In this video, I’ll go through all the process to define and simulate a model with several parts and perform a transient thermal simulation in Salome Meca! Yes, you have been a lot to ask me about this one… I hope this will finally clarify the simulation […]
Salome Automation 2 – Automating Geometry and Mesh Creation with YACS
I promised that I would show you how to automate Salome, including geometry, mesh, simulation and post-process! So, here you go ;-) Let’s start with the Geometry and the Mesh today. Nothing too fancy, just a 3D plate… but that’s how great project start, from small plates ! If you haven’t watched the first video […]
- 1
- 2
- 3
- …
- 7
- Next Page »