![[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca](https://i0.wp.com/feaforall.com/wp-content/uploads/2018/06/2d-shell-beam.jpg?fit=1024%2C576&ssl=1)
In this tutorial, we will look into simulating a 2D shell beam in Salome-Meca. What you will learn here: – How to Create a 2D beam model – How to set correctly Code_Aster for simulating 2D shell – How to post process results and get stress on the thickness If you want to know how […]
[Salome Video Tutorial] Automating Geometry Creation with Python
![[Salome Video Tutorial] Automating Geometry Creation with Python](https://i1.wp.com/feaforall.com/wp-content/uploads/2018/05/Automating-with-Python-Salome-thumbnail.jpg?fit=1024%2C576&ssl=1)
This week I am going into one of the most interesting aspects of using open-source FEA, the fact that you can automate fully geometry and mesh creation using Python! Yes, by automating, I mean that you can create a script and let it make all the hard work to create your geometry model from zero. […]
[Salome Meca 2017 Tutorial] How to simulate a simple beam?
![[Salome Meca 2017 Tutorial] How to simulate a simple beam?](https://i2.wp.com/feaforall.com/wp-content/uploads/2017/11/beam-tutorial_salome_thumbnail.jpg?fit=1024%2C576&ssl=1)
Did you know that Code_Aster was originally developed for structural calculation? I got several requests for a “Beam Tutorial” in the past weeks since I recorded the previous video tutorial of a simple plate analysis… So here it is finally! How to simulate a beam in Salome Meca 2017? In the video, I show you […]
[Ansys AIM 18 Tutorial] Linear static analysis of a pressured pipe
![[Ansys AIM 18 Tutorial] Linear static analysis of a pressured pipe](https://i2.wp.com/feaforall.com/wp-content/uploads/2017/05/Ansys-AIM-18.png?fit=1024%2C576&ssl=1)
Today, I am starting again doing simple tutorials of Ansys! I decided to start with a very simple linear static analysis of a pressured pipe with Ansys AIM 18 Student Edition. And just for the fun, I decided to record this video in 4 different languages (English, French, Chinese and Korean,…) Here is the english […]
Simulating the flow inside a manifold with midas NFX CFD
This week I started again to create tutorials…And the first one coming is the full modelling and simulation of a manifold in NFX CFD. I hope you will like it! This time, it is a midas NFX Tutorial, but I won’t stop here, many more are coming! I decided to start from zero in this […]
Ansys Tutorial: Steady state thermal analysis of a simple plate
In this video, I’ll show you how to do a simple steady state thermal analysis of a plate with the FEA software Ansys. If you want to know more about heat transfer, check out this page here: http://feaforall.com/heat-transfer/
