FEA for All |and all about FEA

[Tutorial 1] How to Install OpenFoam on Linux and Windows

January 11, 2021 by Cyprien 5 Comments

Let’s Talk about Openfoam! Several of my viewers and subscribers have asked me to start making OpenFoam Tutorials, so this is why I am starting this new series. The Purpose will be to show you how to operate the OpenFoam solver with the minimum of hassle and I’ll try to teach you some knowledge about CFD […]

[Salome Automation 5] Batch Process Aster simulations with a loop in YACS

November 21, 2020 by Cyprien 1 Comment

The 5th tutorial of the series is here. In the previous videos, I have shown how to automate 1 simulation using parameters to make it parametric. Now… no one wants to run one sim, wait for it to finish, change the parameters and try again. That’s why I will show you now how to make […]

[Salome Automation 4 ] Automating Paravis Post-processing with YACS

November 14, 2020 by Cyprien Leave a Comment

The 4th part of the YACS tutorial series is here… Post-processing, Finally! ;-) First, I’l come back briefly on the previous video and show you how to correct the small assignment I gave you… to set up a control node that will write the comm file to control Code_Aster’s input deck with parameters! I hope […]

[Salome Automation 3 ] Automating Code Aster Simulation with YACS

November 6, 2020 by Cyprien 4 Comments

The next video of the YACS series “Salome Automation” is here and we are going to learn together how to automate a Code_Aster simulation with YACS… Cool, eh? This is the 3rd video of the series, so I won’t go back on the basics I taught in the video 1 and in the video 2 […]

[Salome Meca Tutorial] Heat Case Transient Thermal Simulation

October 30, 2020 by Cyprien 5 Comments

Finally, a tutorial about Transient Thermal Simulation ;-) In this video, I’ll go through all the process to define and simulate a model with several parts and perform a transient thermal simulation in Salome Meca! Yes, you have been a lot to ask me about this one… I hope this will finally clarify the simulation […]

Salome Automation 2 – Automating Geometry and Mesh Creation with YACS

October 24, 2020 by Cyprien 2 Comments

I promised that I would show you how to automate Salome, including geometry, mesh, simulation and post-process! So, here you go ;-) Let’s start with the Geometry and the Mesh today. Nothing too fancy, just a 3D plate… but that’s how great project start, from small plates ! If you haven’t watched the first video […]