![[Salome Automation 3 ] Automating Code Aster Simulation with YACS](https://feaforall.com/wp-content/uploads/2020/11/Yacs-3-Automating-Code_Aster-with-YACS-1024x576.jpg)
The next video of the YACS series “Salome Automation” is here and we are going to learn together how to automate a Code_Aster simulation with YACS… Cool, eh? This is the 3rd video of the series, so I won’t go back on the basics I taught in the video 1 and in the video 2 […]
[Salome Meca Tutorial] Heat Case Transient Thermal Simulation
![[Salome Meca Tutorial] Heat Case Transient Thermal Simulation](https://feaforall.com/wp-content/uploads/2020/10/heat-case-transient-1024x576.jpg)
Finally, a tutorial about Transient Thermal Simulation ;-) In this video, I’ll go through all the process to define and simulate a model with several parts and perform a transient thermal simulation in Salome Meca! Yes, you have been a lot to ask me about this one… I hope this will finally clarify the simulation […]
Salome Automation 2 – Automating Geometry and Mesh Creation with YACS
I promised that I would show you how to automate Salome, including geometry, mesh, simulation and post-process! So, here you go ;-) Let’s start with the Geometry and the Mesh today. Nothing too fancy, just a 3D plate… but that’s how great project start, from small plates ! If you haven’t watched the first video […]
[ Openturns tutorial 2] Building manually an Openturns / Code_Aster Study with YACS and Python
![[ Openturns tutorial 2] Building manually an Openturns / Code_Aster Study with YACS and Python](https://feaforall.com/wp-content/uploads/2020/10/Openturns-tuto2-thumbnail-1024x576.png)
Let’s talk about uncertainty quantification and sensibility analysis! There is an open-source tool for that called OpenTurns which is integrated in Salome_Meca 2019 (Linux version). This is the tutorial number 2, in which we will talk about deeper settings: How to export your code_aster study manually How to prepare the files in the correct way […]
[Salome Automation 1] Introduction to YACS Module & Beginner Tutorial
![[Salome Automation 1] Introduction to YACS Module & Beginner Tutorial](https://feaforall.com/wp-content/uploads/2020/10/Salome-Automation-1-Introduction-to-YACS-Module-1024x576.png)
Have you ever wanted to automate your simulation process in Salome? The good news is that you can with a little known module called YACS. This module is a bit difficult to use at first without have received a training about it because the interface isn’t very intuitive (It’s open-source…), but once you saw how […]
[Salome Tutorial] Let’s make a Concrete Block with Aggregates with Python in Salome!
![[Salome Tutorial] Let’s make a Concrete Block with Aggregates with Python in Salome!](https://feaforall.com/wp-content/uploads/2020/09/Concrete-Block-Tutorial-Salome-1024x576.png)
I talked about how to use Salome to create geometry with Python Previously… Time to go a bit deeper! Let’s have a look at how to use Python to generate a Concrete Model with Aggregates ;-) Why would I want to generate such a model? Reason 1- This methodology can be used for any type of material […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- …
- 28
- Next Page »
