Cyprien, Author at FEA for All

Engineer Story: Why should you develop your own Code_Aster Module?

July 23, 2021 by Cyprien 5 Comments

I am sharing an article written by Nick Ananchenko, an Ukrainian Mechanical Engineer who used his skills to build his own module in Code_Aster in order to calculate limit stresses in pipes caused by corrosion.

Plate with a hole Simulation: Mesh Convergence Automation with Salome Meca, Code Aster and Python

July 17, 2021 by Cyprien 2 Comments

In this tutorial for Salome Meca, we will talk about how to create the basic plate with a hole simulation model and create a mesh convergence automation !

[OpenFoam Tutorial 5] Turbulent Flow in a Pipe with Salome as Mesher

July 3, 2021 by Cyprien 2 Comments

Let’s Talk about Openfoam, Salome and Turbulent Flow Simulation :) In this 5th tutorial, we will look into how to build an OpenFoam model from scratch by using Salome to do the CAD processing and the Meshing! I’ll also give you some useful bits of knowledge about turbulence modeling in CFD analysis, so I hope […]

Introduction to Modal Analysis with slides and a bit of Theory

June 24, 2021 by Cyprien 2 Comments

If you’ve been reading my blog for some time, you probably know that I have written a lot of blog posts about modal analysis. Not long ago, I did a webinar about modal analysis which had some additional details I have never really mentioned in my previous videos, so I decided to turn it into […]

5 practical way to become a better engineer

June 12, 2021 by Cyprien Leave a Comment

Hello, guys. Cyprien from FEA for All. Today, I prepared a very interesting video. At least I think it will be, and this will be about how you can become a better engineer. So the purpose of this video is to share with you some of the insights I had all over the year by […]