![[GMSH tutorial 2] Model Translation Rotation Extrusion and 3D Meshing – t2.geo](https://feaforall.com/wp-content/uploads/2021/09/gmshtuto2-1024x576.jpg)
Here comes the second tutorial for Gmsh in which I will talk about how to reuse another script, how to do translations, extrusions of geometry and how to work with 3D mesh. If you haven’t watched the first one, you can check it first here. For Chinese viewers, here’s a link to watch the video on […]
[GMSH tutorial 1] Installation and first model building and meshing
![[GMSH tutorial 1] Installation and first model building and meshing](https://feaforall.com/wp-content/uploads/2021/09/gmshtuto1-1024x576.jpg)
I am starting a new series of tutorials about Gmsh today and start from scratch to teach about one of the most (in)famous open source pre-post software: Gmsh! Whatever your CAE engineering background, you have some high chances to meet Gmsh at least once in your career and while it can be easy to use if you […]
[Salome Meca – Code Aster] Nonlinear Quasi-static Plate with a Hole Tutorial
![[Salome Meca – Code Aster] Nonlinear Quasi-static Plate with a Hole Tutorial](https://feaforall.com/wp-content/uploads/2021/08/Nonlinear-plate-Tutorial-1024x576.jpg)
In this tutorial for Salome Meca with Code Aster, I will talk about: What is nonlinear quasi static simulation Some of the theoretical aspects that you need to understand for nonlinear simulation How to change the plate with a hole model into a nonlinear simulation How to enter the strain hardening curve in code aster […]
Engineer Story: Why should you develop your own Code_Aster Module?
I am sharing an article written by Nick Ananchenko, an Ukrainian Mechanical Engineer who used his skills to build his own module in Code_Aster in order to calculate limit stresses in pipes caused by corrosion.
Plate with a hole Simulation: Mesh Convergence Automation with Salome Meca, Code Aster and Python
In this tutorial for Salome Meca, we will talk about how to create the basic plate with a hole simulation model and create a mesh convergence automation !
[OpenFoam Tutorial 5] Turbulent Flow in a Pipe with Salome as Mesher
![[OpenFoam Tutorial 5] Turbulent Flow in a Pipe with Salome as Mesher](https://feaforall.com/wp-content/uploads/2021/07/Openfoam-Tuto5-innerflow-salome-1024x576.png)
Let’s Talk about Openfoam, Salome and Turbulent Flow Simulation :) In this 5th tutorial, we will look into how to build an OpenFoam model from scratch by using Salome to do the CAD processing and the Meshing! I’ll also give you some useful bits of knowledge about turbulence modeling in CFD analysis, so I hope […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- 6
- …
- 37
- Next Page »
