![[Salome Meca Tutorial] Heat Case Transient Thermal Simulation](https://feaforall.com/wp-content/uploads/2020/10/heat-case-transient-1024x576.jpg)
Finally, a tutorial about Transient Thermal Simulation ;-) In this video, I’ll go through all the process to define and simulate a model with several parts and perform a transient thermal simulation in Salome Meca! Yes, you have been a lot to ask me about this one… I hope this will finally clarify the simulation […]
[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca
![[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca](https://feaforall.com/wp-content/uploads/2020/08/Wrench-Simulation-with-Salome-Meca-Tutorial-Thumbnail-1024x576.png)
Hello guys. Cyprien here from FEAforall. in this article, we’ll have a look at how to simulate a wrench into Salome Meca with Code_Aster and I’ll be using Aster Study to do this. In this video I’ll really go into the details at how to get a very nice mesh, how to get some kind […]
How to interface Code_Aster and Open Turns to do uncertainty quantification and sensibility analysis
Today, Let’s talk about uncertainty quantification and sensibility analysis! There is an open-source tool for that called OpenTurns which is integrated in Salome_Meca 2019 (Linux version). There are few tutorials available yet showing the full simulation with Code_aster and the usage of this simulation data to build an openturns case! That’s why one of my […]
[Salome Meca Tutorial] Thermo Mechanical Analysis of a 2D Axisymmetric plate
![[Salome Meca Tutorial] Thermo Mechanical Analysis of a 2D Axisymmetric plate](https://feaforall.com/wp-content/uploads/2019/03/Thermo-meca-simulation-thumbnail-2-1024x576.jpg)
I finally got the time to finish this new Salome-Meca Tutorial that a lot of people asked me! I hope you will like it :) In this video you will learn: How to create a 2D axi-symmetric plate model in Geom How to mesh it with an arithmetic distribution gradient on one side How to […]
How to export Mesh in GMSH Format with Salome Meca?
Did you know that Salome-Meca could be used to create mesh and export it to several Formats such as GMSH? I got the question several times, so I decided to make a quick video to answer it ;-) Here’s the video: That’s all for today, hope you understand better now how to export your mesh […]
[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests
![[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests](https://feaforall.com/wp-content/uploads/2018/11/dev-tuto-2-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! This is the video number 2, make sure you watch the tutorial 1 before this one (You will NOT be able to compile Code_Aster if you didn’t follow the previous tutorial) Here’s what you’ll learn from this […]
