![[OpenFoam Tutorial 5] Turbulent Flow in a Pipe with Salome as Mesher](https://feaforall.com/wp-content/uploads/2021/07/Openfoam-Tuto5-innerflow-salome-1024x576.png)
Let’s Talk about Openfoam, Salome and Turbulent Flow Simulation :) In this 5th tutorial, we will look into how to build an OpenFoam model from scratch by using Salome to do the CAD processing and the Meshing! I’ll also give you some useful bits of knowledge about turbulence modeling in CFD analysis, so I hope […]
[Salome Automation 5] Batch Process Aster simulations with a loop in YACS
![[Salome Automation 5] Batch Process Aster simulations with a loop in YACS](https://feaforall.com/wp-content/uploads/2020/11/Automation-salome-5-Building-a-Loop-1024x576.jpg)
The 5th tutorial of the series is here. In the previous videos, I have shown how to automate 1 simulation using parameters to make it parametric. Now… no one wants to run one sim, wait for it to finish, change the parameters and try again. That’s why I will show you now how to make […]
[Salome Automation 1] Introduction to YACS Module & Beginner Tutorial
![[Salome Automation 1] Introduction to YACS Module & Beginner Tutorial](https://feaforall.com/wp-content/uploads/2020/10/Salome-Automation-1-Introduction-to-YACS-Module-1024x576.png)
Have you ever wanted to automate your simulation process in Salome? The good news is that you can with a little known module called YACS. This module is a bit difficult to use at first without have received a training about it because the interface isn’t very intuitive (It’s open-source…), but once you saw how […]
Salome Shaper Tutorial 2 : Modeling a Curved Pipe
This new curved pipe tutorial isn’t difficult, but it’s a good way to refresh a bit your memory about some of the functions of the open-source parametric CAD modeler Salome Shaper
Salome Shaper Tutorial 1 : Modeling a Parametric Nut
In this video tutorial, I will show you how to create this kind of part with Salome shaper: This is the first video tutorial about Salome Shaper which is a new module of Salome which appeared in Salome 9.3. If you’re wondering how I installed Salome with Shaper, here is the link: https://www.salome-platform.org/downloads/current-version (Download the […]
