I promised that I would show you how to automate Salome, including geometry, mesh, simulation and post-process! So, here you go ;-) Let’s start with the Geometry and the Mesh today. Nothing too fancy, just a 3D plate… but that’s how great project start, from small plates ! If you haven’t watched the first video […]
[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca
![[Full Tutorial] Linear Static FEA Simulation of a Wrench with Salome Meca](https://feaforall.com/wp-content/uploads/2020/08/Wrench-Simulation-with-Salome-Meca-Tutorial-Thumbnail-1024x576.png)
Hello guys. Cyprien here from FEAforall. in this article, we’ll have a look at how to simulate a wrench into Salome Meca with Code_Aster and I’ll be using Aster Study to do this. In this video I’ll really go into the details at how to get a very nice mesh, how to get some kind […]
How to interface Code_Aster and Open Turns to do uncertainty quantification and sensibility analysis
Today, Let’s talk about uncertainty quantification and sensibility analysis! There is an open-source tool for that called OpenTurns which is integrated in Salome_Meca 2019 (Linux version). There are few tutorials available yet showing the full simulation with Code_aster and the usage of this simulation data to build an openturns case! That’s why one of my […]
[Paraview Tutorial 2] Understanding the User Interface
![[Paraview Tutorial 2] Understanding the User Interface](https://feaforall.com/wp-content/uploads/2020/01/2-Paraview-Tuto-Understanding-the-User-Interface-1024x576.png)
In this second video of the Paraview Tutorials Series, I will have a look at the user interface with you. We will have a full tour of the GUI, the menus, …
What is Paraview and How to Install it?
In this series of videos, I will present to you a famous open-source post-processing software called Paraview. This is the paraview website where you can download it: https://www.paraview.org/ Paraview can be overwhelming to use if you are just starting, but it is definitely a very powerful software used a LOT for all kind of data […]
Salome Shaper Tutorial 1 : Modeling a Parametric Nut
In this video tutorial, I will show you how to create this kind of part with Salome shaper: This is the first video tutorial about Salome Shaper which is a new module of Salome which appeared in Salome 9.3. If you’re wondering how I installed Salome with Shaper, here is the link: https://www.salome-platform.org/downloads/current-version (Download the […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- …
- 8
- Next Page »
