![[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal](https://feaforall.com/wp-content/uploads/2018/11/Dev-tuto-1-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! I will teach how to download, install and use Code_Aster from terminal and in a 2nd tutorial, I will show you how to download the source code and compile it :) Side Note: Those tutorials are for Advanced […]
Nonlinear Hertz Contact Tutorial with Salome-Meca 2018
A new video tutorial for Salome Meca full of new stuffs is coming your way! Nonlinear Hertz Contact Tutorial I did in the past a post about the Hertz contact… 4 years ago wow… time flies ;-) Time to show you how to do that with a proper axisymmetric model in Salome-Meca 2018. This is […]
[Salome Paravis Tutorial] Changing the Color Map
![[Salome Paravis Tutorial] Changing the Color Map](https://feaforall.com/wp-content/uploads/2018/06/color-map-1024x576.jpg)
The color map… For those who already know me and read my articles since a long time, you know probably all the good I think about engineers focusing ONLY on colors… If you don’t know what I am talking about, read this article: From stress color painting to real FEA So…Why am I talking about […]
[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca
![[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca](https://feaforall.com/wp-content/uploads/2018/06/2d-shell-beam-1024x576.jpg)
In this tutorial, we will look into simulating a 2D shell beam in Salome-Meca. What you will learn here: – How to Create a 2D beam model – How to set correctly Code_Aster for simulating 2D shell – How to post process results and get stress on the thickness If you want to know how […]
[Salome Video Tutorial] Automating Geometry Creation with Python
![[Salome Video Tutorial] Automating Geometry Creation with Python](https://feaforall.com/wp-content/uploads/2018/05/Automating-with-Python-Salome-thumbnail-1024x576.jpg)
This week I am going into one of the most interesting aspects of using open-source FEA, the fact that you can automate fully geometry and mesh creation using Python! Yes, by automating, I mean that you can create a script and let it make all the hard work to create your geometry model from zero. […]
[Salome Meca 2017 Tutorial] How to simulate a simple beam?
![[Salome Meca 2017 Tutorial] How to simulate a simple beam?](https://feaforall.com/wp-content/uploads/2017/11/beam-tutorial_salome_thumbnail-1024x576.jpg)
Did you know that Code_Aster was originally developed for structural calculation? I got several requests for a “Beam Tutorial” in the past weeks since I recorded the previous video tutorial of a simple plate analysis… So here it is finally! How to simulate a beam in Salome Meca 2017? In the video, I show you […]
