![[Salome Meca Tutorial] Thermo Mechanical Analysis of a 2D Axisymmetric plate](https://feaforall.com/wp-content/uploads/2019/03/Thermo-meca-simulation-thumbnail-2-1024x576.jpg)
I finally got the time to finish this new Salome-Meca Tutorial that a lot of people asked me! I hope you will like it :) In this video you will learn: How to create a 2D axi-symmetric plate model in Geom How to mesh it with an arithmetic distribution gradient on one side How to […]
Nonlinear Hertz Contact Tutorial with Salome-Meca 2018
A new video tutorial for Salome Meca full of new stuffs is coming your way! Nonlinear Hertz Contact Tutorial I did in the past a post about the Hertz contact… 4 years ago wow… time flies ;-) Time to show you how to do that with a proper axisymmetric model in Salome-Meca 2018. This is […]
[Salome Paravis Tutorial] Changing the Color Map
![[Salome Paravis Tutorial] Changing the Color Map](https://feaforall.com/wp-content/uploads/2018/06/color-map-1024x576.jpg)
The color map… For those who already know me and read my articles since a long time, you know probably all the good I think about engineers focusing ONLY on colors… If you don’t know what I am talking about, read this article: From stress color painting to real FEA So…Why am I talking about […]
[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca
![[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca](https://feaforall.com/wp-content/uploads/2018/06/2d-shell-beam-1024x576.jpg)
In this tutorial, we will look into simulating a 2D shell beam in Salome-Meca. What you will learn here: – How to Create a 2D beam model – How to set correctly Code_Aster for simulating 2D shell – How to post process results and get stress on the thickness If you want to know how […]
[Salome Video Tutorial] Automating Geometry Creation with Python
![[Salome Video Tutorial] Automating Geometry Creation with Python](https://feaforall.com/wp-content/uploads/2018/05/Automating-with-Python-Salome-thumbnail-1024x576.jpg)
This week I am going into one of the most interesting aspects of using open-source FEA, the fact that you can automate fully geometry and mesh creation using Python! Yes, by automating, I mean that you can create a script and let it make all the hard work to create your geometry model from zero. […]
[Salome Meca Tutorial] How to simulate a contact solid-plate
![[Salome Meca Tutorial] How to simulate a contact solid-plate](https://feaforall.com/wp-content/uploads/2018/03/plate-solid-contact-salome-meca-1024x576.jpg)
In a previous post a few days ago, I was showing t you how to simulate a glued contact between 2 solids. I realised that there were few nuances that I didn’t describe in that video when you needed to make a contact between a solid and a plate so I made another video to […]
