In this tutorial for Salome Meca, we will talk about:
- How to create the basic plate with a hole simulation model with Salome Meca
- The difference between 1st and 2nd order Triangle Mesh
- How to perform a mesh convergence study
- How to automate all of this with YACS and Python
The Plate with a hole simulation was one of the first articles I published on this blog 8 years ago! And it is still a classic :)
Here’s the video:
For Chinese viewers, here’s a link on bilibili where I started to upload videos for you.
I hope you’ll learn a lot!
The Chapters of the video:
00:02:49 Intro to the plate with a hole simulation
00:06:00 Creation of the Plate Geometry
00:10:16 Meshing of the Plate
00:13:44 Creating the Aster Study Simulation
00:20:40 Solving the Simulation and Post-processing
00:23:13 Discussion about 1st order VS 2nd Order
00:28:27 Discussion about Force and Pressure BCs
00:36:32 Mesh Convergence Automation with YACS
Download the model and all the scripts
If you have any question of comment, let me know!
Cyprien “Back to the Plate with a hole 8 years later” Rusu
[…] video is a following the previous tutorial where I talk in details about the linear static simulation of the plate with a hole. If you haven’t followed that tutorial, I advise you to start there first before going into […]