from basics to Advanced

Nonlinear Hertz Contact Tutorial with Salome-Meca 2018

by 8 Comments

A new video tutorial for Salome Meca full of new stuffs is coming your way! Nonlinear Hertz Contact Tutorial I did in the past a post about the Hertz contact… 4 years ago wow… time flies ;-) Time to show you how to do that with a proper axisymmetric model in Salome-Meca 2018. This is […]

[Salome CFD Tutorial 1] Simulating a simple 2D channel flow from A to Z with Code_Saturne

by 12 Comments

Important Note: There is newer version of this video now available here as Salome CFD/Code_Saturne has changed a bit since 2018. Most of what you will read here are still mostly relevant, but there are some changes in 1) The way to install Salome CFD 2) The Options and Menus in Code_Saturne Here’s the link […]

[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca

by 12 Comments

In this tutorial, we will look into simulating a 2D shell beam in Salome-Meca. What you will learn here: – How to Create a 2D beam model – How to set correctly Code_Aster for simulating 2D shell – How to post process results and get stress on the thickness If you want to know how […]

[Salome Video Tutorial] Automating Geometry Creation with Python

by 3 Comments

This week I am going into one of the most interesting aspects of using open-source FEA, the fact that you can automate fully geometry and mesh creation using Python! Yes, by automating, I mean that you can create a script and let it make all the hard work to create your geometry model from zero. […]

[Salome-Meca Tutorial] How to perform Stress Linearization in Code_Aster

by 1 Comment

If you ever have tried to analyze pressure vessels, you know that there is ONE feature that you absolutely need to be able to use… Stress linearization! Why? The short answer is that you can’t extract the bending stresses and other kind of stresses you need to check your model against the ASME code section […]

[Code Aster Tutorial] How to run your simulation with Astk

by 7 Comments

If you are new to Salome-Meca, you probably never heard about Astk… Astk is the way to run the command file and link all other files together which was used before Aster Study. It still works! …And sometimes, it is even more convenient than Aster Study to use, so I decided to make this video […]

View Cyprien Rusu's profile on LinkedIn

Find videos about FEA