![[Salome Meca Tutorial] Pillow Box CAD modelling and Simulation](https://feaforall.com/wp-content/uploads/2019/04/Pillow-box-tutorial-part-1-1024x576.jpg)
I realised that this is one of the first tutorial that I made which focus on showing more in details how to use the Geom Module to create a CAD model! This is what you will learn here: – How to generate some planes, points and curves – How to use basic functions to extrude […]
[Salome Meca Tutorial] Thermo Mechanical Analysis of a 2D Axisymmetric plate
![[Salome Meca Tutorial] Thermo Mechanical Analysis of a 2D Axisymmetric plate](https://feaforall.com/wp-content/uploads/2019/03/Thermo-meca-simulation-thumbnail-2-1024x576.jpg)
I finally got the time to finish this new Salome-Meca Tutorial that a lot of people asked me! I hope you will like it :) In this video you will learn: How to create a 2D axi-symmetric plate model in Geom How to mesh it with an arithmetic distribution gradient on one side How to […]
How to export Mesh in GMSH Format with Salome Meca?
Did you know that Salome-Meca could be used to create mesh and export it to several Formats such as GMSH? I got the question several times, so I decided to make a quick video to answer it ;-) Here’s the video: That’s all for today, hope you understand better now how to export your mesh […]
[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests
![[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests](https://feaforall.com/wp-content/uploads/2018/11/dev-tuto-2-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! This is the video number 2, make sure you watch the tutorial 1 before this one (You will NOT be able to compile Code_Aster if you didn’t follow the previous tutorial) Here’s what you’ll learn from this […]
[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal
![[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal](https://feaforall.com/wp-content/uploads/2018/11/Dev-tuto-1-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! I will teach how to download, install and use Code_Aster from terminal and in a 2nd tutorial, I will show you how to download the source code and compile it :) Side Note: Those tutorials are for Advanced […]
[Salome CFD Tutorial 1] Simulating a simple 2D channel flow from A to Z with Code_Saturne
![[Salome CFD Tutorial 1] Simulating a simple 2D channel flow from A to Z with Code_Saturne](https://feaforall.com/wp-content/uploads/2018/09/salome-CFD-2D-channel-Flow.png)
Important Note: There is newer version of this video now available here as Salome CFD/Code_Saturne has changed a bit since 2018. Most of what you will read here are still mostly relevant, but there are some changes in 1) The way to install Salome CFD 2) The Options and Menus in Code_Saturne Here’s the link […]
- « Previous Page
- 1
- 2
- 3
- 4
- 5
- 6
- …
- 8
- Next Page »
