![[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal](https://feaforall.com/wp-content/uploads/2018/11/Dev-tuto-1-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! I will teach how to download, install and use Code_Aster from terminal and in a 2nd tutorial, I will show you how to download the source code and compile it :) Side Note: Those tutorials are for Advanced […]
Nonlinear Hertz Contact Tutorial with Salome-Meca 2018
A new video tutorial for Salome Meca full of new stuffs is coming your way! Nonlinear Hertz Contact Tutorial I did in the past a post about the Hertz contact… 4 years ago wow… time flies ;-) Time to show you how to do that with a proper axisymmetric model in Salome-Meca 2018. This is […]
[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca
![[Code_Aster Tutorial] Simulating a 2D shell Beam in Salome-Meca](https://feaforall.com/wp-content/uploads/2018/06/2d-shell-beam-1024x576.jpg)
In this tutorial, we will look into simulating a 2D shell beam in Salome-Meca. What you will learn here: – How to Create a 2D beam model – How to set correctly Code_Aster for simulating 2D shell – How to post process results and get stress on the thickness If you want to know how […]
[Salome Meca Tutorial] How to simulate a contact solid-plate
![[Salome Meca Tutorial] How to simulate a contact solid-plate](https://feaforall.com/wp-content/uploads/2018/03/plate-solid-contact-salome-meca-1024x576.jpg)
In a previous post a few days ago, I was showing t you how to simulate a glued contact between 2 solids. I realised that there were few nuances that I didn’t describe in that video when you needed to make a contact between a solid and a plate so I made another video to […]
[Code Aster Tutorial] How to run your simulation with Astk
![[Code Aster Tutorial] How to run your simulation with Astk](https://feaforall.com/wp-content/uploads/2018/03/code-aster-astk-1024x576.jpg)
If you are new to Salome-Meca, you probably never heard about Astk… Astk is the way to run the command file and link all other files together which was used before Aster Study. It still works! …And sometimes, it is even more convenient than Aster Study to use, so I decided to make this video […]
[Salome Meca Tutorial] How to define a glued contact between parts
![[Salome Meca Tutorial] How to define a glued contact between parts](https://feaforall.com/wp-content/uploads/2018/03/contact-video-thumbnail-1024x576.jpg)
I am back for a new video about Salome Meca and Code_aster… this time about glued contact! If you want to perform an FEA simulation or a mechanical system, it only seems natural to have several parts in your analysis interacting together… Even if for test cases, you can use a simple plate model, real […]
