![[Salome Meca Tutorial] How to simulate a contact solid-plate](https://feaforall.com/wp-content/uploads/2018/03/plate-solid-contact-salome-meca-1024x576.jpg)
In a previous post a few days ago, I was showing t you how to simulate a glued contact between 2 solids. I realised that there were few nuances that I didn’t describe in that video when you needed to make a contact between a solid and a plate so I made another video to […]
[Code Aster Tutorial] How to run your simulation with Astk
![[Code Aster Tutorial] How to run your simulation with Astk](https://feaforall.com/wp-content/uploads/2018/03/code-aster-astk-1024x576.jpg)
If you are new to Salome-Meca, you probably never heard about Astk… Astk is the way to run the command file and link all other files together which was used before Aster Study. It still works! …And sometimes, it is even more convenient than Aster Study to use, so I decided to make this video […]
[Salome Meca Tutorial] How to define a glued contact between parts
![[Salome Meca Tutorial] How to define a glued contact between parts](https://feaforall.com/wp-content/uploads/2018/03/contact-video-thumbnail-1024x576.jpg)
I am back for a new video about Salome Meca and Code_aster… this time about glued contact! If you want to perform an FEA simulation or a mechanical system, it only seems natural to have several parts in your analysis interacting together… Even if for test cases, you can use a simple plate model, real […]
[Salome-Meca Tutorial] How to perform a modal analysis?
![[Salome-Meca Tutorial] How to perform a modal analysis?](https://feaforall.com/wp-content/uploads/2018/02/Modal-analysis-THUMBNAIL-1024x576.jpg)
In this video tutorial for Salome-Meca 2017, I will show you how to do a modal analysis of a simple plate with Aster-Study! Here’s what you will learn: How to model the plate and prepare the mesh How to use the ASSEMBLAGE function to generate the mass and rigid matrix. How to use the […]
What is Damping and why is it useful?
What is Damping? I am starting with a big question today :) …and to answer this question, we have to understand a few things about dynamic analysis first… Because only a part moving in some way experiences damping… Damping is basically an attenuation of this movement due to some kind of friction If you hadn’t […]
[Salome Meca Tutorial] How to check stress and probe results
![[Salome Meca Tutorial] How to check stress and probe results](https://feaforall.com/wp-content/uploads/2018/01/Salome-Meca-Post-processing-thumbnail-1024x576.jpg)
It’s great to know how to simulate a mechanical part… but if you can’t read the results you need, that’s also useless… That’s where post-processing comes into play. Salome-Meca uses a module called “Paravis” to display the results and it is not necessarily very straightforward to understand how it works… That’s why I made a […]
- « Previous Page
- 1
- …
- 14
- 15
- 16
- 17
- 18
- …
- 32
- Next Page »
