![[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests](https://feaforall.com/wp-content/uploads/2018/11/dev-tuto-2-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! This is the video number 2, make sure you watch the tutorial 1 before this one (You will NOT be able to compile Code_Aster if you didn’t follow the previous tutorial) Here’s what you’ll learn from this […]
[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal
![[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal](https://feaforall.com/wp-content/uploads/2018/11/Dev-tuto-1-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! I will teach how to download, install and use Code_Aster from terminal and in a 2nd tutorial, I will show you how to download the source code and compile it :) Side Note: Those tutorials are for Advanced […]
Understanding Dynamics and the effect of Mass
I have been in France for few weeks now… and I had to take the French TGV train very often… That’s when I started to have some weird thoughts and remembered a problem I thought about a lot when I was younger… I decided to write about it now that I have a bit more […]
Nonlinear Hertz Contact Tutorial with Salome-Meca 2018
A new video tutorial for Salome Meca full of new stuffs is coming your way! Nonlinear Hertz Contact Tutorial I did in the past a post about the Hertz contact… 4 years ago wow… time flies ;-) Time to show you how to do that with a proper axisymmetric model in Salome-Meca 2018. This is […]
[Salome CFD Tutorial 1] Simulating a simple 2D channel flow from A to Z with Code_Saturne
![[Salome CFD Tutorial 1] Simulating a simple 2D channel flow from A to Z with Code_Saturne](https://feaforall.com/wp-content/uploads/2018/09/salome-CFD-2D-channel-Flow.png)
Important Note: There is newer version of this video now available here as Salome CFD/Code_Saturne has changed a bit since 2018. Most of what you will read here are still mostly relevant, but there are some changes in 1) The way to install Salome CFD 2) The Options and Menus in Code_Saturne Here’s the link […]
How to Implement the Lattice Boltzmann Method (LBM) with a single relaxation time collision operator
This article complements and enhance the first article published on the blog about the LBM Method: Everything you need to know about the Lattice Boltzmann Method Today, the article will focus on the practical implementation of this method! I leave the place now to the author of the article, my friend and engineer Nicolas Maquignon.Implementation of […]
- « Previous Page
- 1
- …
- 12
- 13
- 14
- 15
- 16
- …
- 32
- Next Page »
