![[Salome Meca Tutorial] How to define a glued contact between parts](https://feaforall.com/wp-content/uploads/2018/03/contact-video-thumbnail-1024x576.jpg)
I am back for a new video about Salome Meca and Code_aster… this time about glued contact! If you want to perform an FEA simulation or a mechanical system, it only seems natural to have several parts in your analysis interacting together… Even if for test cases, you can use a simple plate model, real […]
[Salome-Meca Tutorial] How to perform a modal analysis?
![[Salome-Meca Tutorial] How to perform a modal analysis?](https://feaforall.com/wp-content/uploads/2018/02/Modal-analysis-THUMBNAIL-1024x576.jpg)
In this video tutorial for Salome-Meca 2017, I will show you how to do a modal analysis of a simple plate with Aster-Study! Here’s what you will learn: How to model the plate and prepare the mesh How to use the ASSEMBLAGE function to generate the mass and rigid matrix. How to use the […]
[Salome Meca Tutorial] How to check stress and probe results
![[Salome Meca Tutorial] How to check stress and probe results](https://feaforall.com/wp-content/uploads/2018/01/Salome-Meca-Post-processing-thumbnail-1024x576.jpg)
It’s great to know how to simulate a mechanical part… but if you can’t read the results you need, that’s also useless… That’s where post-processing comes into play. Salome-Meca uses a module called “Paravis” to display the results and it is not necessarily very straightforward to understand how it works… That’s why I made a […]
[Salome Meca Tutorial] Simulating a 2D Quarter Plate
![[Salome Meca Tutorial] Simulating a 2D Quarter Plate](https://feaforall.com/wp-content/uploads/2018/01/Quarter-plate-salome-meca_800.jpg)
It has been some time already since the last Salome-Meca video tutorial… The next one will teach you how to model, mesh and simulate a 2D Quarter Plate. And that’s probably one of the most important tutorials you want to follow for Salome-Meca 2017 Here’s the video: There will be more soon, and especially a […]
[Salome Meca 2017 Tutorial] How to simulate a simple beam?
![[Salome Meca 2017 Tutorial] How to simulate a simple beam?](https://feaforall.com/wp-content/uploads/2017/11/beam-tutorial_salome_thumbnail-1024x576.jpg)
Did you know that Code_Aster was originally developed for structural calculation? I got several requests for a “Beam Tutorial” in the past weeks since I recorded the previous video tutorial of a simple plate analysis… So here it is finally! How to simulate a beam in Salome Meca 2017? In the video, I show you […]
How to install Salome Meca 2017 on Windows?
Since the last videos I made which showed how to install a Virtual Linux Machine on your PC and install Salome Meca 2017 on top of it, a new release of Salome-Meca 2017 for Windows went out! Good news for those who are a bit afraid to step into the linux world but still want […]
- « Previous Page
- 1
- …
- 4
- 5
- 6
- 7
- 8
- Next Page »
