Today, I will teach you what is docker and how to install OpenFoam on a Mac M1 Pro using it. If you don’t have a Mac, it will work the same on Windows and Linux, I just thought it would be cool to show you that you can also do CFD simulation with OpenFoam on […]
Engineer Story: Why should you develop your own Code_Aster Module?
I am sharing an article written by Nick Ananchenko, an Ukrainian Mechanical Engineer who used his skills to build his own module in Code_Aster in order to calculate limit stresses in pipes caused by corrosion.
[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests
![[Code Aster Dev Tuto 2] How to compile Code Aster from Source and run validation tests](https://feaforall.com/wp-content/uploads/2018/11/dev-tuto-2-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! This is the video number 2, make sure you watch the tutorial 1 before this one (You will NOT be able to compile Code_Aster if you didn’t follow the previous tutorial) Here’s what you’ll learn from this […]
[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal
![[Code Aster Dev Tuto 1] How to install Aster Full 14.2 and run it from terminal](https://feaforall.com/wp-content/uploads/2018/11/Dev-tuto-1-1024x576.jpg)
In this series of new Code_Aster tutorials, I decided to go in the development aspect of Code_Aster! I will teach how to download, install and use Code_Aster from terminal and in a 2nd tutorial, I will show you how to download the source code and compile it :) Side Note: Those tutorials are for Advanced […]
